KT‑Micro KT‑1T4 KT‑1T2 EB‑BUS Main Wiring Harness, 8Pin Waterproof Main Cable for KT‑Micro KunTeng E‑Bike Controller

This EB‑BUS waterproof main wiring harness is exclusively designed for KT‑Micro (KunTeng / 昆腾) ebike controllers. Two versions available: KT‑1T2 (1 input to 2 outputs) and KT‑1T4 (1 input to 4 outputs). It adopts 8PIN main plug as EB‑BUS communication bus, to connect display, throttle, brake sensors for KT‑Micro controller system. Custom wiring service is available to meet various after‑sales and custom modification demands.

✅ Exclusively for KT‑Micro(KunTeng) EB‑BUS ebike controller system

✅ E‑bike controller replacement, ebike rebuild & modification

✅ Repair shops, bulk stocking and custom wiring project

✅ EB‑BUS communication bus connection for display, throttle, brake cut‑off sensors

Choose your model:

1 × KT‑Micro KT‑1T2 EB‑BUS Main Wiring Harness

OR

1 × KT‑Micro KT‑1T4 EB‑BUS Main Wiring Harness

✅ Two Splitter Options for Different KT‑Micro System Builds

KT‑1T2 (1 to 2): basic setup for display + throttle.

KT‑1T4 (1 to 4): full setup with dual brake levers, throttle and display, perfect for complete KT‑Micro ebike system.

✅ Genuine KT‑Micro EB‑BUS Communication Bus

Built for KT‑Micro EB‑BUS digital bus system. Transmit signal between KT‑Micro controller, display, throttle and brake sensors stably. Waterproof connectors protect signal transmission on rainy rides.

✅ Waterproof Multi‑Pin Connectors

Each branch fitted with waterproof circular connectors for brake, throttle and display. Prevent water and dust ingress, improve reliability for outdoor e‑bike riding.

✅ Dedicated for KT‑Micro KunTeng Controller Only

This wiring harness is engineered exclusively for KT‑Micro EB‑BUS controllers. It cannot be directly used on other brand controllers. Custom modification is available for non‑KT‑Micro controller upon request.

✅ Customization Available for After‑Sales Demand

We support custom cable length, wire gauge and connector configuration. Great for repair workshops and ebike OEM projects to solve special wiring requirements.

⚠️ This harness ONLY compatible with KT‑Micro KunTeng EB‑BUS controllers. It cannot directly work with other brands of controllers.

⚠️ If you need harness for non‑KT‑Micro controllers, please contact us for special customization; all custom specs subject to communication confirmation.

⚠️ Check port definition and pinout before installation. Wrong wiring may damage KT‑Micro controller or accessories.

⚠️ Product photos for reference only, actual product shall prevail.